3DMGAME论坛

标题: 白屏停止工作的来试试。亲测可进（转自黑魂吧） [打印本页]

作者: longfeijie 时间: 2014-4-28 14:19
标题: 白屏停止工作的来试试。亲测可进（转自黑魂吧）
本帖最后由 longfeijie 于 2014-4-28 14:44 编辑

steam：AsukaFade
原文：
This link has a driver file that tricks your PC into thinking you have a passive 3D Acer monitor.
Link: http://www.afriendlyfox.com/wp-c ... r-EDID-Override.zip
- Extract the contents of the ZIP you just downloaded to some folder.
- Open Device Manager by opening your Start Menu (or start screen) and typing “Device Manager,” then press enter.
- Expand thee “Monitors” category.
- Right click the currently installed monitor under the “Monitors” category and select “Update Driver Software.”
- Click “Browse my computer for driver software.”
- Click “Let me pick from a list of device drivers on my computer.”
- Click “Have Disk…” toward the bottom right of the window.
- Browse to the location of the INF file you extracted in Step 1, then press OK.
- Press “Next,” then “Install This Driver Software Anyway.”
- Reboot!
- Launch Dark Souls 2
// If you run into driver signature problems, you’ll have to disable driver signature enforcement. To do so, perform a Google search for “disable driver signature enforcement <Your OS>,” and follow the steps you find.
// As with all 3rd party programs, installing and using them is at your own risk.
// To uninstall this work-around:
- Go to Device Manager
- Left click the arrow next to "Displays"
- Right click the Display you're using (robably something like "nP-display")
- Go to the "Driver" tab
- Click on "Roll back driver"

重点渣翻：
-这个驱动是欺骗你的电脑认为你有一个3D Acer显示器
-点上面的链接下载，解压
-打开设备管理器（win7在控制面板-->硬件和声音或者直接开始菜单搜索，xp我忘了）
-点击监视器-->在你的显示器那里右键-->更新驱动-->第二项“浏览计算机以查找”-->第二项“从设备驱动列表选择”-->右下角从磁盘安装-->选择解压出来的inf文件-->不要管提示的错误安装，然后重启

因为不知道会不会有副作用，等官方补丁出来之后可以选择卸载
-卸载方法：
前面跟上面的步骤一样，右键你的显示器，选择属性，回滚驱动

逛贴吧看到的，搬运跟翻译是贴吧的大斐歌ge

Acer-HR274H-3D-Monitor-EDID-Override.zip (1.3 KB, 下载次数: 1698)

欢迎光临 3DMGAME论坛 (https://bbs.3dmgame.com/)