Scathe - NPC 生命值增減會顯示跳出數值

foxbrian

某些人的怨念物終於有modder 實作出來了...
可搭配Scouter 使用, 隨便翻一翻, 請樓下分流...

=============================================================
Scathe v0.1
http://www.tesnexus.com/downloads/file.php?id=29429
http://www.youtube.com/watch?v=w4EeQGE2ssI
http://www.bethsoft.com/bgsforums/index.php?s=060192f3a01a722a8a795c48a305b9d3&showtopic=1070350

NPC 的生命值減少或增加時, 會在身上出現計數數值

需求：
- OBSE v0018b2+
- Pluggy

安裝：
1. 將Scathe.esp、Scathe.ini 複製到Data
2. 將kingthingspetrock.tth 安裝到C:WindowsFont
3. 將DataobsepluginsOBSE_Elys_Pluggy.dll 更名為OBSE_Elys_Pluggy_HUD.dll

Scathe.ini：
Set zzScatheVarsQ.fCounterLifeTime to 4
計數值出現、可見的持續時間

Set zzScatheVarsQ.sTotalCounters to 40        
同時最多能顯示的計數值數量

Set zzScatheVarsQ.sFOV to 75
攝影鏡頭的FOV

Set zzScatheVarsQ.sTrajectory to 1                                
; The trajectory each counter follows (default : 1)
計數的軌跡
1 = 拋射
2 = 上升
3 = 下降

Set zzScatheVarsQ.fProjectileInitVXMin to 5
; Initial velocity, b'ween this range, in the X-axis that's imparted to a counter (default : 5,8)

Set zzScatheVarsQ.fProjectileInitVXMax to 8
5~8 = 拋射計數的X軸初始速度

Set zzScatheVarsQ.fProjectileInitVYMin to 4
Set zzScatheVarsQ.fProjectileInitVYMax to 7
4~7 = 拋射計數的Y軸初始速度

Set zzScatheVarsQ.fProjectileAccXMin to -1
Set zzScatheVarsQ.fProjectileAccXMax to -0.1
-1~-0.1加速度 = 拋射計數的X軸加速度

Set zzScatheVarsQ.fProjectileAccYMin to -1
Set zzScatheVarsQ.fProjectileAccYMax to -0.1
-1~-0.1加速度 = 拋射計數的Y軸加速度

Set zzScatheVarsQ.sClampToDistance to 1                                
1 = 離玩家太遠的NPC 不會刷出數值

Set zzScatheVarsQ.fMaxVisiblityDistance to 2500
1 = 離玩家超過2500的NPC 不會刷出數值

Set zzScatheVarsQ.sPlayerTargetsOnly to 0
1 = 只有玩家的戰鬥目標才會刷出數值

Set zzScatheVarsQ.sDisableInThirdPerson to 1
1 = 第三人稱時關閉數值

Set zzScatheVarsQ.sAnnotateCounters to 1                        
1 = 在數值中顯示註解數字

Set zzScatheVarsQ.sEnabled to 1
1 = 啟用傷害/恢復值的刷新數

Set zzScatheVarsQ.sDamageCounterColorR to 249        ; 傷害數值的顏色 - 紅色分量
Set zzScatheVarsQ.sDamageCounterColorG to 203        ; 傷害數值的顏色 - 綠色分量
Set zzScatheVarsQ.sDamageCounterColorB to 128        ; 傷害數值的顏色 - 藍色分量

Set zzScatheVarsQ.sHealthIncreaseCounters to 1
1 = 啟用生命值的刷新數

Set zzScatheVarsQ.sHealthCounterColorR to 237 ; 生命值的顏色 - 紅色分量
Set zzScatheVarsQ.sHealthCounterColorG to 61 ; 生命值的顏色 - 綠色分量
Set zzScatheVarsQ.sHealthCounterColorB to 83 ; 生命值的顏色 - 藍色分量




=============================================================