很多人说转向问题～～我要专门发个帖子说明

furisa

游戏 的线性设计 底部有2项很重要

速度线性  这个是3DM 翻译错误  正确翻译是 速度敏感性

是指 当某个速度下 轮胎 接受 最大转向角度
at 100kph:
70 = 90* 轮胎转向角
80 = 80* 轮胎转向角

这个值默认是65 是最佳值～ 如果嫌弃高速不能转就调小 50以下  保证180KM 也能 让你甩车尾
越高 则锁的越多 80以上 几乎 130KM 以下 才给能打满方向盘

FILTER 这个值是过滤线性
你大概可以理解成设备响应时间～拉到100 则是1秒 推荐50是最佳值
因为玩家不是机器 打方向盘过程总会有细微误差 然后我们会试图矫正误差 车子就会左右晃 或 走线不准确
这个数值 默认是0 游戏有点恶作剧 这数值默认是50才对的～～ 0.5秒误差 是人操作反映接受范围

其他设置就不用说了 很简单～～死区 几百块的手柄 拉到0  杂牌就5%  线性就是X轴曲线 不懂百度去
=================================================================
如果还没看懂。。。给大家一个  STEAM社区 5星评价的 设置文章。设备为X1手柄 解释部分也有外国人对速度线性的解释
My Recommended Settings
NOTE: At the moment people have reported that this makes the carts quite difficult to handle, but it works very well with other cars, I'm currently tweaking to try and find something for the carts.

This is by no means the final settings, I will change things as I see fit and I encourage that you do the same to get the feeling you are after, this should at least provide a reasonable starting point at the very least.

Steering dead zone: 0
Steering Sensitivity: 30

Throttle dead zone: 0
Throttle Sensitivity: 50

Brake dead zone: 0
Brake Sensitivity: 30

Clutch dead zone: 0
Clutch Sensitivity: 45

Speed Sensitivity: 75
Controller Filtering: 50

Force Feedback: 100
Advanced: Off


Explanation Of Settings
This section is what each of the settings relating to the controller do, or at least my understanding from playing around trying to find the best set up.

The dead zones control how big an area that your controller won't register any input for, the higher the number the more you will have to move the joystick or trigger before the game registers your action. I personally haven't noticed a huge difference between 0 and 100, but if you have an older controller which is a bit more worn you may want to increase these if your springs are holding the trigger or joystick out all the way anymore.

Sensitivities are all in the name, how sensitive the game will be to your actions, except for speed sensitivity which has been horribly named.

Controller filtering sensitivity is a filter on the input coming from your controller, so a higher value means will result in a smoother experience because the minute tiny adjustments get averaged out to become smooth. A lower value means that there is no filtering so the game uses your raw input, any little change in your controller the game will register.

Speed sensitivity I had wrong initially as pointed out by rzezol (Thanks!). Speed sensitivity changes the sensitivity and what turning angle you can turn at relative to the speed you're travelling. So if you're driving slowly you can turn sharper relative to when you're going fast even if you push the joystick all the way it's not going to turn very sharply. The higher you set this option the less wheel turn you can make at higher speeds.

I think you are wrong in explanation of speed sensitivity option. IMO it's working like this:
-driving slow - wheel movement are fast and you can turn wheel very far from center position;
-driving fast - wheel movement are slower and you can turn wheel not that far from center position even if you pus工口GAMEpad stick all the way left or right.
Conclusion: the higher you set speed sensitivity - the less wheel turn you can make at higher speed.

Force feedback controls the vibration of your controller I personally haven't noticed it making any differences between 5-100, with 0 turning off vibration all together.

Controller input mode just cycles through some appalling default configurations.