MSI Afterburner 4.6.0 Beta 14 (14649)

3DM超级玩家

MSI Afterburner 4.6.0 beta 14 (build 14649)

• Now you can use <Tab> and <Shift>+<Tab> keys to select next/previous point on the curve. This feature is useful for those who prefer to use keyboard <Up>/<Down> keys to fine-tune selected point frequency offset instead of adjusting the point with mouse cursor. I'm not sure if many of you know that, but I'll remind that you can also hold <Ctrl> while fine-tuning frequency offset with <Up>/<Down> keys to jump to the nearest frequency value rounded to 10MHz
• 现在你可以使用<Tab>和<Shift><Tab>键选择下一个/上一个曲线上的点。此功能可用于更喜欢使用键盘<Up>/<Down>键来调整选定点频率偏移而不是使用鼠标调整角度的那些。我不知道许多你知道，但我会提醒你也可以<Ctrl>按住微调频率偏移<Up>/<Down>键跳到最近的频率值四舍五入到10MHz
• Now you can press <Enter> key to edit selected point frequency offset from keyboard. Alternately you may press <Shift>+<Enter> to specify absolute target frequency value, so the editor will calculate desired offset automatically
• 现在你可以按下<Enter>键从键盘编辑选定的点频偏。另外，你可以按<Shift><Enter>指定绝对目标频率值，所以编辑器将自动计算所需的偏移量
• Slightly changed keyboard control interface for AMD implementation of V/F curve editor. Previously you could select P-State and fine-tune frequency with <Up>/<Down> or <Ctrl>+<Up>/<Ctrl>+<Down> keys or fine-tune voltage <Left>/<Right> or <Ctrl>+<Left>/<Ctrl>+<Right> keys. Now both frequency and voltage are adjusted with <Up>/<Down> or <Ctrl>+<Up>/<Ctrl>+<Down> keys and voltage or frequency keyboard input focus is selected with <PageUp> / <PageDown> keys. Voltage or frequency keyboard input focus is now highlighted by selected point brightness on the curve. Keyboard input focus also affects new <Enter> / <Shift> + <Enter> functionality, allowing you to type in target voltage or frequency in both offset or absolute form
• 稍微更改一下就用键盘控制接口AMD执行V/F曲线编辑器。以前你可以选择P-州和微调频率和<Up>/<Down>或<Ctrl><Up>/<Ctrl><Down>键或微调电压<Left>/<Right>或<Ctrl><Left>/<Ctrl><Right>键。现在频率和电压调整和<Up>/<Down>或<Ctrl><Up>/<Ctrl><Down>键和电压或频率键盘输入焦点是用<PageUp>/<PageDown>键选择。键盘输入电压或频率现在的重点是强调曲线上的选定点的亮度。键盘输入焦点也会影响新<Enter><Shift><Enter>功能，允许您键入目标电压或频率以抵消或绝对形式
• Similar to NVIDIA implementation, now you may also hold <Alt> when dragging V/F curve point on AMD systems. This will result in moving whole curve up/down while preserving each point's offset
• 类似于NVIDIA执行，现在你也可以持AMD系统上拖动<Alt>时，V/F曲线点。这将导致整个曲线向上/向下移动，同时保持每个点的偏移量
• Added undo/redo support to voltage/frequency curve editor:
• 撤消/重做支持添加到电压/频率曲线编辑器：
• 
  
  • Now voltage/frequency curve editor is saving up to 1024 last states of the curve during editing and allows you to undo/redo changes with <Ctrl>+<Z> or <Ctrl>+<Y> / <Ctrl>+<Shift>+<Z> keys
  • 现在电压/频率曲线编辑器是节省高达1024的国家的曲线编辑过程中，并允许您撤消/重做的变化<Ctrl><Z>或<Ctrl><Y><Ctrl><Shift><Z>钥匙
  • Undo history is discarded when you apply the curve, forcibly reread it from hardware with <F5> key or switch to different GPU on multi-GPU system
  • 当您应用曲线时，撤消历史记录将被丢弃，被迫重读它从硬件和<F5>密钥或切换到不同的GPU多GPU系统
  • Number of recorded undo/redo steps is displayed in square brackets in the editor window caption
  • 记录撤消/重做步骤的数量是显示在编辑器窗口标题中的方括号
  • 
    
• Application properties dialog window is now displayed with topmost style when the properties are activated from detached monitoring window and "Always on top" mode is enabled for it
• 应用程序属性对话框窗口现在显示与顶部的样式属性被激活时从独立监视窗口和"总在最前"模式启用它
• NVIDIA Scanner components are updated to latest version, NVML.dll issue should be addressed now
• NVIDIA扫描仪组件更新到最新版本，NVML。dll现在应该解决的问题
• 
  

RTSS 7.2.1 Beta 5 (build 20189) (included in beta download)

• Slightly refactored Direct3D and Vulkan On-Screen Display rendering codepaths due to implementation of optional offscreen rendering mode. This mode is currently disabled by default, it is reserved for future versions as a codebase for asynchronous On-Screen Display rendering implementation
• 由于可选的离线渲染模式的实施，稍重构的Direct3D和德国伏尔铿屏上显示的渲染代码路径。这种模式是当前默认情况下禁用，它是为未来保留的版本作为一个代码库为异步屏上显示呈现实现
• Changed power user protected settings locking approach. Now power user settings ("Enable Custom Direct3D support" options and Vector2D On-Screen Display rendering mode) are locked for enabling by default in the global profile only, but you can still change them at application profiles level
• 电力用户更改受保护的设置锁定方式。现在用户设置("启用自定义Direct3D支持"选项和Vector2D屏上显示的渲染模式)中启用默认的锁只全球配置文件，但您仍然可以更改它们在应用程序配置文件级别
• Now RivaTuner Statistics Server validates DirectX runtimes installation at startup and displays warning message if required DirectX runtime components are missing. Power users may disable this warning message as well as any previously existing diagnostic warning messages displayed at RivaTuner Statistics Server startup and enable silent startup mode via the configuration file if necessary
• 现在图像显示质量统计服务器验证DirectX运行时在启动时安装和显示警告消息如果需要DirectX运行时组件丢失。用户可以禁用此警告消息以及任何先前诊断图像显示质量统计服务器启动时显示警告消息，如果必要，通过配置文件启用静默启动模式
• Added user extendable exclusions list for desktop windows notification performed during installation and uninstallation of system CBT hooks. Currently the only exclusion in the list is Microsoft Outlook process, which previously tended to display help popup window on closing RivaTuner Statistics Server
• CBT系统钩子的安装和卸载期间用户可扩展的排除列表中添加桌面窗口通知执行。目前只有排除列表中的Microsoft Outlook进程，而此前往往显示弹出窗口关闭图像显示质量统计服务器上的帮助
• Rendering pipeline flushing no longer stays active if you enable scanline sync mode but disable framerate limiting support with hotkeys from MSI Afterburner
• 如果您启用扫描同步模式，但禁用帧速率限制来自微星加力燃烧室的热键支持，呈现管道冲洗不再保持活跃
• Fixed multhithreaded active busy-wait loop based frame capture implementation, which could prevent desktop videocapture from working in the previous version
• 基于固定multhithreaded的活动忙-等待环帧捕获执行，可以防止桌面视频捕获在以前版本的工作
  

百 度 网 盘