更好的照片模式

smile417

转自n网：https://www.nexusmods.com/wuchangfallenfeathers/mods/121


Adds photomode into the game with several functions and customizable keybinds.
在游戏中添加照片模式，具有多种功能和可自定义的按键绑定。









Keybinds  按键绑定

• Enter photomode with F7.  使用 F7 进入照片模式。
• Enter freeze animation photomode with F8. This mode enters photomode and freezes Wuchang's currently playing animation.
  使用 F8 进入冻结动画照片模式。该模式进入拍照模式，冻结武昌当前播放的动画。
• Enter freeze all photomode with F9. This mode enters photomode and puts the game in extreme slow motion, essentially freezing everything.
  输入 冻结所有照片模式 用 F9。此模式进入照片模式，使游戏处于极慢动作，基本上冻结了一切。
• Move the camera with W,A,S,D.
  使用 W、A、S、D 移动相机。
• Turn the camera left/right/up/down with the mouse or the right analog stick.
  用鼠标或右模拟摇杆向左/向右/向上/向下转动相机。
• Move the camera up and down with Space and X.
  使用空格键和 X 上下移动相机。
• Take high resolution screenshots with the Left Click.
  左键单击拍摄高分辨率屏幕截图。
• Exit photomode with Right Click.
  右键退出照片模式。
• Hold the Left Shift button down while moving the camera with W, A, S, D, X, Space to move faster.
  按住左 Shift 按钮，同时使用 W、A、S、D、X、Space 移动相机可加快移动速度。
• Hold the Left Control button down while moving the camera with W, A, S, D, X, Space to move slower.
  按住左控制按钮，同时使用 W、A、S、D、X、Space 移动相机以移动速度。
• Increase and decrease the camera's FOV with 1 and 2.
  使用 1 和 2 增加和减少相机的 FOV。
• Tilt the camera left and right with Q and E.
  使用 Q 和 E 左右倾斜相机。
• Toggle visible HUD/UI elements with H.
  使用 H 切换可见的 HUD/UI 元素。
  

The screenshots have the same resolution as your game. So if you're running the game at 1080p then the screenshot's resolution will be 1920x1080.
屏幕截图的分辨率与您的游戏相同。因此，如果您以 1080p 运行游戏，那么屏幕截图的分辨率将为 1920x1080。

The screenshots are saved at %LOCALAPPDATA%\Project_Plague\Saved\Screenshots\Windows. Easy way to go there is to paste this in Windows Explorer's address bar and then press enter.
屏幕截图保存在 %LOCALAPPDATA%\Project_Plague\Saved\Screenshots\Windows 中。简单的方法是将其粘贴到 Windows 资源管理器的地址栏中，然后按 Enter。


Customizatizon  定制

Ignore this portion if you don't care about customization.
如果您不关心定制，请忽略这部分。

Steam  蒸汽

Navigate to "%LOCALAPPDATA%\Project_Plague\Saved\Config\Windows\". Easy way to go there is to paste this in Windows Explorer's address bar and then press enter.
导航到“%LOCALAPPDATA%\Project_Plague\Saved\Config\Windows\”。简单的方法是将其粘贴到 Windows 资源管理器的地址栏中，然后按 Enter。

Gamepass  游戏通行证

Might be the same path as steam, unfortunately I don't know for sure.
可能与蒸汽是相同的路径，不幸的是我不确定。


Once you're there open the file named "Engine.ini" with a text editor like Notepad and paste these lines in it:
到达那里后，使用记事本等文本编辑器打开名为“Engine.ini”的文件，然后将以下行粘贴到其中：

[/Game/Mods/Photomode/ModActor.ModActor_C]
[/游戏/模组/照片模式/ModActor.ModActor_C]
PhotomodeKey=F7  照片模式键=F7
FreezeAnimationPhotomodeKey=F8
冻结动画照片模式键=F8
FreezeAllPhotomodeKey=F9  FreezeAllPhotomode 键=F9
ExitPhotomodeKey=RightMouseButton
ExitPhotomodeKey=右鼠标按钮
CaptureScreenshotKey=LeftMouseButton
CaptureScreenshotKey=左鼠标按钮
MoveForwardKey=W
MoveBackwardsKey=S  向后移动键=S
MoveLeftKey=A
MoveRightKey=D  移动右键=D
MoveUpKey=SpaceBar  MoveUpKey=空格键
MoveDownKey=X
FastMovementKey=LeftShift
FastMovementKey=左移
SlowMovementKey=LeftControl
SlowMovementKey=左控制
IncreaseFOVKey=One  增加 FOVKey=一个
DecreaseFOVKey=Two  DecreaseFOVKey=两个
ToggleHUDKey=H  切换 HUDKey=H
TiltLeftKey=Q  左倾斜键=Q
TiltRightKey=E


You can find valid keys to use here: Unreal Engine Fkeys - Pastebin.com
你可以在此处找到要使用的有效密钥： 虚幻引擎 Fkeys - Pastebin.com
All of them should work theoretically, at least the keyboard and the gamepad keys should work for sure.
理论上所有这些都应该可以工作，至少键盘和游戏手柄按键应该可以肯定地工作。


Installation with BP Mod Loader
使用 BP Mod Loader 安装

Download and install Wuchang Mod Enabler.
下载并安装 武昌 Mod Enabler。

Download and install Blueprint mod loader.
下载并安装 蓝图模组加载器。

Download the mod. Extract its .zip archive.
下载模组。提取其.zip 存档。

Go to where your game is installed and navigate to \Project_Plague\Content\Paks\. Create a new folder in here named "~mods" if you don't have one already.
转到游戏的安装位置，然后导航到 \Project_Plague\Content\Paks\。如果您还没有文件夹，请在此处创建一个名为“~mods”的新文件夹。

Drop the mod's .pak file in there. In the end it should look like this:
将模组的 .pak 文件放到那里。最后它应该看起来像这样：

\Project_Plague\Content\Paks\~mods\Photomode.pak


Navigate to "%LOCALAPPDATA%\Project_Plague\Saved\Config\Windows\. Easy way to go there is to paste this in Windows Explorer's address bar and then press enter. The path might be different on the Gamepass version of the game.
导航到“%LOCALAPPDATA%\Project_Plague\Saved\Config\Windows\。简单的方法是将其粘贴到 Windows 资源管理器的地址栏中，然后按 Enter。Gamepass 版本的游戏路径可能不同。

Once you're there open the file named "Engine.ini" with a text editor like Notepad and paste the mod's name in there like this:
到达那里后，使用记事本等文本编辑器打开名为“Engine.ini”的文件，然后将模组的名称粘贴到其中，如下所示：

[/Game/Mods/WFF_BPLoader/WBP_WFF_BPLoader.WBP_WFF_BPLoader_C]
[/游戏/模组/WFF_BPLoader/WBP_WFF_BPLoader.WBP_WFF_BPLoader_C]
Mods=Photomode  Mods=照片模式


Installation with UE4SS  使用 UE4SS 安装

Download and install Wuchang Mod Enabler.
下载并安装 武昌 Mod Enabler。

Download UE4SS. You can find the download link when you scroll all the way down. The file you should download should look something like "UE4SS_v3.0.1-416-g4a88719.zip". The numbers might change since the experimental version of UE4SS is updated frequently.
下载 UE4SS。 当您一直向下滚动时，您可以找到下载链接。您应该下载的文件应该类似于“UE4SS_v3.0.1-416-g4a88719.zip”。由于 UE4SS 的实验版本经常更新，这些数字可能会发生变化。

To install UE4SS you need to extract its .zip archive and then go to where your game is installed and navigate to this path: \Project_Plague\Binaries\Win64. Drop the extracted files here. In the end it should look like this:
要安装 UE4SS，你需要解压其.zip 存档，然后转到游戏安装位置并导航到以下路径：\Project_Plague\Binaries\Win64。将提取的文件拖放到此处。最后它应该看起来像这样：

\Project_Plague\Binaries\Win64\dwmapi.dll

\Project_Plague\Binaries\Win64\ue4ss


Download the mod and extract its .zip file. Go to where your game is installed and navigate to \Project_Plague\Content\Paks. Make a new folder named "LogicMods" in here if you don't have one already. Drop Photomode.pak from the .zip archive in here.
下载模组并解压其.zip 文件。转到游戏的安装位置，然后导航到 \Project_Plague\Content\Paks。如果您还没有，请在此处创建一个名为“LogicMods”的新文件夹。将 Photomode.pak 从 .zip 存档拖放到这里。

In the end it should look like this for the Steam version of the game: \Project_Plague\Content\Paks\LogicMods\Photomode.pak
最后，对于游戏的 Steam 版本，它应该如下所示：\Project_Plague\Content\Paks\LogicMods\Photomode.pak

The paths might be different for the gamepass version of the game.
游戏通行证版本的路径可能不同。
Notes  笔记

Currently the mod isn't compatible with BP Modloader and Console Enablerbecause it looks like installing BP Modloader breaks keybinds completely for mods. It doesn't even work when installed/spawned with BP Modloader, the keybinds just don't work with it unfortunately.
目前，该模组与 BP Modloader 和 Console Enabler 不 兼容，因为安装 BP Modloader 看起来会完全中断模组的按键绑定。它甚至在使用 BP Modloader 安装/生成时也不起作用，不幸的是，按键绑定不适用于它。

danecom58

谢谢分享！谢谢！