|
|
转自n网:https://www.nexusmods.com/eldenringnightreign/mods/442
A clean, lightweight timer that helps you master Nightreign. Won't affect your game performance or online status - it's just a helpful overlay. Tracks all 4 phases with countdowns and gives you heads-up alerts before critical moments. Just hit Ctrl+S to start. Draggable display, volume test and controls, and smart audio alerts keep you ready.
一个干净、轻量的计时器,帮助你掌握夜之统治。这不会影响你的游戏性能或在线状态——它只是一个有用的叠加层。通过倒计时跟踪四个阶段,并在关键时刻前提前提醒你。只需按 Ctrl+S 开始。可拖曳显示、音量测试与控制,以及智能音频提醒,始终让你随时准备就绪。
A quick note for English users:
给英文用户一个简短说明:
I initially released this mod for the Japanese community.
我最初是为日本社区发布这个模组的。
The descriptions on this page were translated using AI.
本页的描述是通过人工智能翻译的。
Also, the default alert sound is a Japanese voice. (You can change it to any sound you prefer.)
另外,默认的警报声是日语声音。(你可以切换成任何你喜欢的声音。)
Features 特征
- Online Safe 在线保险箱
This tool only displays an overlay on your screen and does not interact with game files in any way, ensuring there is no risk of bans or penalties.
该工具仅在屏幕上显示叠加层,不与游戏文件互动,确保不会有封禁或处罚风险。
- Lightweight 轻量化
Uses only 3MB of memory, ensuring minimal impact on game performance.
仅占用 3MB 内存,确保对游戏性能的影响最小。

Functionality 功能
Once started, the timer automatically runs through 4 phases.
一旦开始,计时器会自动经历四个阶段。
- Until the first shrink begins (4:30)
直到第一个心理医生开始(4:30) - Until the shrink ends (3:00)
直到心理医生结束(3:00) - Until nightfall begins (3:30)
直到夜幕降临(3:30) - Until nightfall (3:00) 直到夜幕降临(3:00)
For the first and third timers, when 1 minute remains, an audio alert will play and the timer text will turn red.
对于第一次和第三次,当剩余1分钟时,会播放音频提醒,计时器文字会变为红色。

How to Use 如何使用
Quick Start 快速入门
1. Install AutoHotkey v2.0
1. 安装 AutoHotkey v2.0
Download and install it from https://www.autohotkey.com/
从 https://www.autohotkey.com/ 下载并安装
(This is the software required to run the script. You can simply close it after installation is complete.)
(这是运行脚本所需的软件。安装完成后你可以直接关闭它。)
2. Download and Extract 2. 下载与提取
Download the `.zip` file for this mod and extract it to a folder of your choice.
下载这个模组的“.zip”文件,然后解压到你选择的文件夹里。
3. Launch the Timer 3. 发射计时器
Double-click the `.ahk` script file to run the script.
双击“.ahk”脚本文件即可运行脚本。
4. Start the Timer 4. 启动计时器
Press `Ctrl + S` to start the timer.
按下“Ctrl + S”开始计时器。
Requirements 要求
- The game must be running in Borderless Windowed mode.
游戏必须运行在无边框窗口模式。 - The default UI is optimized for Full HD (1920x1080) resolution.
默认界面优化为全高清(1920x1080)分辨率。
Other resolutions may be supported by adjusting the code.
通过调整代码,可能支持其他分辨率。
Usage Notes 使用说明
- The timer must be started manually at the beginning of day one and day two.
计时器必须在第一天和第二天开始时手动启动。 - You can click and drag the timer to move it anywhere on your screen.
你可以点击并拖动计时器,把它移动到屏幕上的任何位置。 - The script is customizable using any text editor.
脚本可用任何文本编辑器进行自定义 。
By editing the script, you can change hotkeys, background transparency, and more.
通过编辑脚本,你可以更改快捷键、背景透明度等。
Hotkeys 热键
Main Controls 主要控制
Ctrl + S : Start timer
Ctrl + S:开始计时器
Ctrl + ←/→ : Switch to previous/next phase
Ctrl + ←/→ :切换到上一阶段/下一阶段
Ctrl + Home : Reset to waiting state
Ctrl + Home :重置为等待状态
Ctrl + End : Exit application
Ctrl + End : Exit application
Ctrl + P : Test audio alert
Ctrl + P:音频警报测试
Ctrl + ↑/↓ : Adjust volume
Ctrl + ↑/↓ :调整音量
Ctrl + O : Change alert sound
Ctrl + O:更换警报声音
Developer/Testing 开发/测试
F5 : Reload script F5:重新加载脚本
Ctrl + T : Test 1-minute warning (starts first timer from 1:02).
Ctrl + T:测试 1 分钟警告(首次尝试从 1:02 开始)。
Ctrl + Y : Test phase transition (starts first timer from 0:02).
Ctrl + Y:测试相位转换(首次尝试从 0:02 开始)。
If you find this tool helpful, please consider leaving a like or sharing!
如果你觉得这个工具有帮助,请考虑点赞或分享!
Your comments are greatly appreciated.
非常感谢你的评论。
|
|