|
|
转自n网：https://www.nexusmods.com/residentevilrequiem/mods/32
Several damage multiplier mods
多个伤害倍增模组
Damage multiplier mods, here is what they do:
伤害倍增模组，它们的作用如下：
DTE: damage to enemies DTE：对敌人造成的伤害
DTP: damage to player DTP：对玩家造成的伤害
x.2 DTE and x0.5 DTP
x.2 DTE 和 x0.5 DTP
x.3 DTE and x0.5 DTP
x.3 DTE 和 x0.5 DTP
x.4 DTE and x0.5 DTP
x.4 DTE 和 x0.5 DTP
x.10 DTE and x0.5 DTP
x.10 DTE 和 x0.5 DTP
x1 DTE and x0.5 DTP
x1 DTE 和 x0.5 DTP
-- Custom mod V1 --
-- 自定义模组 V1 --
Generally speaking this mod gives you x2 damage, x4 wince and also trims down the penalties at difficulty levels 9 and 10. I am not going into all the technical details but this means you are going to deal slightly more damage at lv. 9 and 10, you retain your wince power and you will take less damage. I capped the damage to player at 1.5x (instead of 3.6x). At lv. 1-7 you are not going to have any damage reduction.
一般来说，这个模组给你2倍伤害，4倍皱眉，并且在9和10难度时减少了惩罚。我不会详细讲所有技术细节，但这意味着你在9级和10级时会造成稍微多一点伤害，你保留了皱眉的力量，而且受到的伤害也会更少。我把对玩家的伤害限制在1.5倍（而不是3.6倍）。在1-7级时，你不会有任何伤害减免。
stun mod: only increases stun (wince) power to trigger melee moves
眩晕模组：只增加眩晕（皱眉）力量以触发近战招式
How to install: 安装方法：
1) Put this mod in your RE9 "mods" folder of Fluffy Manager and enable it.
1）把这个模组放到 Fluffy Manager 的 RE9“mods”文件夹里并启用它。
2) Launch the game 2）启动游戏
3) Enable the Loose File Loader from the REFramework menu (you only need to do this once)
3）在 REFramework 菜单中启用 Loose File Loader（只需作一次）
4) Once the files are loaded the mod is operative
4）文件加载完成后，模组即可正常运行
IMPORTANT!! About the Loose File Loader: the first time REFramework scans your game folder, it takes a lot of time. There are about 500k files to scan, so be patient. This is something REFramework needs to do only once; after that anytime you launch the game, your mods will be loaded in a couple of seconds. For testing purpose I have been installing and uninstalling mods all day and I never had to wait, and I am running the game on a 4 years old laptop.
重要！！关于松散文件加载器：REFramework 第一次扫描你的游戏文件夹时，需要花费大量时间。大约有 50 万个文件需要扫描，请耐心等待。REFramework 只需要做一次; 之后，每次启动游戏，你的模组都会在几秒钟内加载完成。为了测试，我整天都在安装和卸载模组，从来不用等，而且我是在一台四年历史的笔记本上运行这款游戏。
Activate only one of these mod at the time
每次只激活其中一个模组
This mod has been made with Synthlight RE9-Editor, if you know what you are doing you can easily use these files to make your own mod.
这个模组是用 Synthlight RE9-Editor 制作的，如果你懂行，可以轻松用这些文件做自己的模组。
Many thanks to Synthlight for the RE9 editor and to praydog2 for the REFramework.
非常感谢 Synthlight 提供 RE9 编辑器，以及 praydog2 提供的 REFrame 工作。
|
|
发表于 2026-3-2 11:11
收藏
