超级玩家
 
- 贡献度
- 51
- 金元
- 7198
- 积分
- 924
- 精华
- 0
- 注册时间
- 2010-3-17
|
一直白嫖，第一次发帖，搬运个实用MOD，在论坛没见到过，侵删
英文不好，具体功能看机翻介绍，暂且叫他法理头衔管理器，再也不用担心领地法理乱糟糟
版本1.5 MOD自带简体中文
MOD英文名：
Title Manager
工 坊：
https://steamcommunity.com/sharedfiles/filedetails/?id=2436624088
下 载：
特点：
- 让您转移县、公国和王国的法理领主。这适用于可以在头衔搜索器中找到的任何头衔，无论该头衔是否由您持有，或者它是否已经创建。
- 允许您将给定头衔（公国或以上）下的所有法理头衔大量转移到另一个同等规模的头衔（即将不列颠尼亚和法国合并为一个法理帝国）。请注意，目标头衔并没有被破坏，它只是变成了名义上的（即它下面没有法理土地）。
- 允许您设置公国、王国或帝国的法理首都，只要该县在法律上已经是该公国/王国/帝国的一部分。（如果它还没有在法律上，第一个功能会让你这样做）
（注意：所有单头衔转移必须在头衔之间有一个步骤，它们之间的目标小于接收者，例如一个县是转移到公国，公国到王国，王国到帝国。转移超过一级的头衔无效，相同大小的头衔将被一次性合并。）
转移头衔：
1. 导航到您希望转让的标题的法理头衔屏幕；这可以通过单击法理县/公国/王国/帝国模式中的盾牌来完成，或者如果您想转移您的主要头衔，请单击左下角的盾牌。
2. 单击窗口右上角的“目标头衔”按钮，将此头衔指定为目标。
3. 通过与第 1 部分所述相同的过程，导航到您希望将目标转移到的头衔的法理头衔屏幕。
4. 单击窗口右上角的“接收者标题”按钮进行分配这个标题作为接收者。
5. 单击“转让头衔”决定，使接收头衔成为目标头衔的新法理领主。
6. 完成。
要合并头衔：
1. 按照上面概述的步骤 1-3，确保目标和接收者头衔是同一等级（公国、王国或帝国）
2. 单击“合并同等大小的头衔”决定以大规模转让所有法律目标头衔下的头衔到接收者头衔。
3. 完成。
将一个县设置为公国/王国/帝国的法理首都：
1. 确保您的县在法律上已经是该公国/王国/帝国的一部分。（如果不是，请参考上面的说明）
2. 将县设置为目标标题，方法同上。
3.将公国/王国/帝国设置为接收者头衔，同上。
4. 点击重大决策“Change De Jure Capital”。该决定可能有空洞的结果，但如果该决定完全出现，则一切都已正确完成并且正在按预期工作。
5. 完成。
如果您想在设置目标和接收者头衔后使“转让头衔”决定消失，请使用“清除目标和指定头衔”决定。如果您想再次转移标题，只需选择另外两个标题以通过上述相同流程进行管理。
修改 window_title.gui 文件，因此与更改该文件的任何 mod 不兼容。
**然而，如果你想让这个mod与其他改变GUI的mod兼容，请在另一个之前加载这个mod，并编辑第二个mod的window_title.gui文件，使这些行相当于第183行和第185行mod 的 window_title.gui 被复制到正确的位置。**
Features:
- Lets you transfer the de jure liege of counties, duchies, and kingdoms. This works for any title that can be found in title searcher, whether that title is held by you or not, or whether it has even been created yet.
- Lets you mass transfer all de jure titles under a given title (duchy or above) to another title of equal size (i.e. consolidating Brittania and France into a single empire de jure). Note that the target title is not destroyed, it simply becomes titular (i.e. having no de jure land under it).
- Lets you set the de jure capital county of a duchy, kingdom, or empire, so long as the county is already de jure part of that duchy/kingdom/empire. (If it isn't already de jure, the first feature will let you make it so)
(Note: all single-title transfers must be between titles with one step between them, with the target smaller than the receiver, e.g. a county being transferred to a duchy, a duchy to a kingdom, and a kingdom to an empire. Transferring titles with more than one step between them has no effect, and titles of equal size will be consolidated all at once.)
To transfer titles:
1. Navigate to the de jure title screen for the title you wish to transfer; this can be done by clicking on a shield in de jure counties / duchies / kingdoms / empires mode, or if you want to transfer your primary title, by clicking the shield in the bottom left.
2. Click the "Target Title" button in the top-right of the window to assign this title as the target.
3. Navigate to the de jure title screen for the title you wish to have the target transferred to, by the same process as described in part 1.
4. Click the "Receiver Title" button in the top-right of the window to assign this title as the receiver.
5. Click the decision "Transfer Titles" to make the receiver title the new de jure liege of the target title.
6. Done.
To consolidate titles:
1. Follow steps 1-3 as outlined above, ensuring that the target and receiver title are the same tier (both duchies, or kingdoms, or empires)
2. Click the decision "Consolidate Equal-Size Titles" to mass transfer all de jure titles under the target title to the receiver title.
3. Done.
To set a county as de jure capital of a duchy / kingdom / empire:
1. Ensure your county is de jure part of that duchy / kingdom / empire already. (If it is not, refer to the instructions above)
2. Set the county as the target title, by the same method as above.
3. Set the duchy / kingdom / empire as the receiver title, also as above.
4. Click the major decision "Change De Jure Capital." The decision may have empty results, but if the decision shows up at all, everything has been done correctly and is working as intended.
5. Done.
If you would like to make the "transfer titles" decision disappear after setting a target and receiver title, then use the "Clear Target and Designee Titles" decision. If you'd like to transfer titles again, just select another two titles to be managed by the same process above.
Modifies the window_title.gui file, so incompatible with any mod changing that file.
**However, if you want to make this mod compatible with other mods changing the GUI, load this mod before the other one, and edit the window_title.gui file of the second mod so that the lines equivalent to lines 183 and 185 in this mod's window_title.gui are copied into the correct location.**
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看，没有帐号？注册
x
评分
-
1
查看全部评分
-
|
[复制链接]
发表于 2022-3-23 02:26
QQ好友和群
QQ空间
腾讯微博
腾讯朋友
收藏
楼主
