【搬运】将铁眼换成了《残酷小队》的主角

smile417

转自n网：https://www.nexusmods.com/eldenringnightreign/mods/188
"We've got a new contract. Heolstor the Nightlord is trying to destroy the universe and the higher ups aren't ready to cash out their slurpcoins yet. Kill him and give them a few more precious seconds, they swear their coin is about to go to the moon."
“我们有新合同。夜主赫奥尔斯托正试图毁灭宇宙，而上层还没准备好兑现他们的滑溜币。杀了他，给他们多几秒钟宝贵的时间，他们发誓他们的硬币快要飞上月球了。”

-

Replaces base Ironeye with MT Foxtrot/John Cruelty from Cruelty Squad, complete with a CS-inspired bow!
用《残酷小队》中的 MT Foxtrot/John Cruelty 替换了基础版铁眼，还配有受 CS 启发的弓！

--- Installation ---  --- 安装---

IF YOU DON'T ALREADY HAVE ME3 SET UP:
如果你还没设置好 ME3：

1) Install me3by downloading and running "me3_installer.exe".
1）通过下载并运行“me3_installer.exe”来安装 ME3。

2) Open a command line window (Windows key + R -> Put "cmd" into the
2） 打开命令行窗口（Windows 键 + R -> 在
run prompt, press enter) and type "me3 info". If me3 tells you about its
运行提示，按回车）并输入“ME3 Info”。如果《质量效应 3》告诉你
directories everything's installed correctly.
目录，所有东西都安装正确。

3) Make a folder for your Nightreign mods somewhere easily accessible on your computer,
3）在电脑上方便访问的地方为你的夜王模组创建一个文件夹，
call it "NightreignMods". Within this NightreignMods folder, create a
叫它“夜行 Mods”。在这个 NightreignMods 文件夹里，创建一个
new folder called "othermods". If you have any other asset replacer mods
一个叫“othermods”的新文件夹。如果你有其他资产替换模组的话
you want to use you can put their files in here to use them alongside
你想用的是，可以把他们的文件放进去，这样可以和它们一起使用
John Cruelty!  约翰·克鲁尔蒂！

4) Extract the "CrueltySquadProtagOverIroneye" folder from the .zip file into the NightreignMods folder.
4）将“CrueltySquadProtagOverIroneye”文件夹从.zip 文件中解压到 NightreignMods 文件夹中。

5) Create your mod profile by opening a text editor and copy-pasting the following into it:
5）通过打开文本编辑器并复制粘贴以下内容创建你的版主资料：

profileVersion = "v1"

[[supports]]
game = "nightreign"

[[packages]]
id = "otherreplacermods"
source = "othermods"

[[packages]]
id = "csoverironeye"
source = "CrueltySquadProtagOverIroneye"


5b) Even if you're only playing Single Player I strongly recommend downloading Seamless Co-op (https://www.nexusmods.com/eldenringnightreign/mods/3?tab=files), extracting the "SeamlessCoop" folder from the archive into the "NightreignMods" directory and adding the following below the above in the mod profile:
5b）即使你只玩单人模式，我强烈建议下载 Seamless Co-op（https://www.nexusmods.com/eldenringnightreign/mods/3?tab=files），将“SeamlessCoop”文件夹从归档中解压到“NightreignMods”目录，并在模组配置文件中添加以下内容：

[[natives]]
path = "SeamlessCoop/nrsc.dll"

This is because Seamless Co-op makes its own save file separate from your
这是因为无缝合作模式会创建独立于你
main one (the one that gets uploaded to Steam Cloud) so there's no risk
主版（上传到 Steam Cloud 的那个），所以没有风险
of going online with a modded save.
用模组存档上线。

6) Save the mod profile text file in our NightreignMods directory as "CSProtagPlusOthers.me3" (Switch
6）将模组配置文件文本文件保存在我们的 NightreignMods 目录中，格式为“CSProtagPlusOthers.me3” （Switch）
the "File type" in the save window to "All files" to avoid saving the
在保存窗口中将“文件类型”切换为“所有文件”以避免保存
text file as "CSProtagPlusOthers.me3.txt")
文本文件为“CSProtagPlusOthers.me3.txt”）

7) Double-click "CSProtagPlusOthers.me3" and play!
7）双击“CSProtagPlusOthers.me3”然后开始！


IF YOU ALREADY HAVE ME3 SET UP:
如果你已经设置好了质量效应3：

1) Extract the "parts" folder from "CrueltySquadProtagOverIroneye" into one of your asset replacement package folders.
1）将“CrueltySquadProtagOverIroneye”中的“parts”文件夹解压到你的资产替换包文件夹中。


MODS SHOULD ONLY BE USED THROUGH ME3OFFLINE WITH ALT SAVES OR WITH SEAMLESS CO-OP OR YOU'LL GET BANNED!
模组只能通过 ME3离线使用，使用小号存档或无缝合作 模式，否则会被封号！

Check out my port of ShyWearsFangs' model of Zoe from Beat Banger over Wylder!
看看我移植的 ShyWearsFangs 在 Wylder 上 Beat Banger 的 Zoe 模型！

-

Thanks to Pear0533 for FLVER Editor, ividyon for WitchyBND and garyttierney/Dasaav/vswarte for me3
感谢 Pear0533 的 FLVER 编辑，ividyon 的 WitchyBND，以及 garyttierney/Dasaav/vswarte 的 me3


https://wwaun.lanzoul.com/isiKa3dqu42j

danecom58

谢谢分享！谢谢！