|
该mod的初版本已经是2016年的事了 此次专为重置版5.00更新
内容为两把武器 外观如下 刚刚拍的 武器在使用对应的法印后会附带对应的颜色光效和效果 但若同时开启其他光效mod则基本看不到效果 在使用“巫师制造者”时，您会获得能量值，这会使伤害强度提高 5%。您的能量值没有上限，但拥有的能量值越多，它们消失的速度就越快。 用于衡量强度的最大分值为 40 分。 每块符卡的消耗量为：以你拥有的总电量为基数，每 10 个电量单位（向下取整）消耗 1 个电量单位。最多只能消耗 4 个电量单位。 在使用“巫师制造者”技能时，您所施放的每个法术都会为这把剑附加一个效果。这些效果每 40 秒持续一次。这种效果不会因施放不同的法术而重新生效，但如果您再次施放相同的法术，该效果就会重新生效。 伊伦德 - 为剑添加了减速效果。 奎恩 - 增加穿甲护甲 伊尼 - 增加点燃的几率 艾西 - 改为眩晕状态 阿德 - 机会降临 如何获得：控制台添加 上面钢下面银 additem("WitchMaker") additem("WitchBreaker")
WitchMaker - Remaster Ready
A steel sword that was created by a witch that had a very strong interest in blades, is now regarded as one of the most powerful blades in the right hands.
WitchMaker is a unique sword with a unique property that not only increased magical effectiveness, but also melee effectiveness. Where to Get it
Currently you can buy it from the Grandmaster Smith in the blood and wine expansion. you can also acquire it by this command when using the debug console.
additem("WitchMaker")
additem("WitchBreaker")
The Effects
As you use WitchMaker you gain charges that increase Sign Intensity by 5%. There is no cap to how many charges you can have, but the more charges you have, the quicker they dissapate.
The maximum charges that will apply to sign intensity is 40.
Each sign cast consumes 1 charge for every 10 charges you have rounded down. Only up to 4 charges.
Each sign you cast while using WitchMaker adds an effect to the sword. These effects last 40 seconds each. This is not refreshed by casting a different sign, but is refreshed if you recast the same sign.
Yrden - Adds a slowing effect to the sword.
Quen - Adds Armor peircing
Igni - Adds chance to ignite
Axii - Change to stun
Aard - Chance to staggar
For each sign on the sword at the same time melee damage is increased damage by 10%
If you have all 5 signs on the sword at the same time, WitchMaker goes into sign overload causing 100% damage increase and increased effectiveness of individual sign effects for 20 seconds.
Future Plans
I will be updating to support the upcoming overhaul.
| 
发表于 2026-10-3 07:32
收藏
